Sweco Long Radius MIlls
May 5, 2016Sweco Removable Center Column Mills
May 5, 2016
FMS-5LR
| Capacity |
5 ft³ (1500 lbs. load capacity) |
| Max Straight Part Length |
12 inches |
| Motion Generator |
5 hp, TENV, 1200 RPM, 3-phase 230, 460 or 575 volt. 60 Hz. |
| Vibralite Bowl |
Chamber – all cast polyurethane elastomer with 1″ minimum thickness in high wear areas |
| Shipping Weight |
Approximately 1300 lbs. (including control panel) |
FMS-14LR
| Capacity |
14 ft³ (4200 lbs. load capacity) |
| Max Straight Part Length |
14 inches or more, depending on part cross-section and batch size |
| Motion Generator |
10 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. |
| Lining |
Abrasion-resistant lining of cast polyurethane with ¾” minimum thickness in high wear areas. |
| Shipping Weight |
Approximately 3800 lbs. (including control panel) |
FMS-20LR
| Capacity |
20 ft³ (6000 lbs. load capacity) |
| Max Straight Part Length |
18 inches or more, depending on part cross-section and batch size |
| Motion Generator |
20 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. Recirculating oil lubrication system. |
| Lining |
Abrasion-resistant lining of cast polyurethane with 1″ minimum thickness in high wear areas. |
| Shipping Weight |
Approximately 6500 lbs. (including control panel) |
