Sweco Batch Mills
May 5, 2016Sweco Spiral Mills
May 5, 2016
FMD-1LR
| Capacity |
1 ft³ (300 lbs. load capacity) |
| Max Straight Part Length |
9 inches |
| Motion Generator |
1/3 hp, TENV, 1200 RPM, single phase 115 volt; 3-phase 230, 460 or 575 volt. 60 Hz. (non-reversing) |
| Vibralite Bowl |
Chamber – all cast polyurethane elastomer with ¾” minimum thickness in high wear areas |
| Shipping Weight |
195 lbs. (empty) |
FMD-3LR
| Capacity |
3 ft³ (900 lbs. load capacity) |
| Max Straight Part Length |
15 inches |
| Motion Generator |
1 ¼ or 2 ½ hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. (non-reversing) |
| Lining |
Abrasion-resistant lining of cast polyurethane with ¾” minimum thickness in high wear areas. |
| Shipping Weight |
850 lbs. (empty) |
FMD-4LR
| Capacity |
4 ft³ (1200 lbs. load capacity) |
| Max Straight Part Length |
18 inches |
| Motion Generator |
2 ½ hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. (non-reversing) |
| Lining |
Abrasion-resistant lining of cast polyurethane with ¾” minimum thickness in high wear areas. |
| Shipping Weight |
960 lbs. (empty) |
FMD-7LR-2
| Capacity |
7 ft³ (2100 lbs. load capacity) |
| Max Straight Part Length |
20 inches |
| Motion Generator |
5 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. (non-reversing) |
| Lining |
Abrasion-resistant lining of cast polyurethane with ¾” minimum thickness in high wear areas. |
| Shipping Weight |
Approximately 1620 lbs. (including control panel) |
FMD-10LR
| Capacity |
10 ft³ (2500 lbs. load capacity) |
| Max Straight Part Length |
24 inches or more, depending on part cross-section and batch size |
| Motion Generator |
5 hp, TENV, 1200 RPM, 3-phase 230 or 460 volt. 60 Hz. |
| Lining |
Abrasion-resistant ¾” Cast Polyurethane |
| Shipping Weight |
Approximately 1025 lbs. |
FMD-14LR
| Capacity |
14 ft³ (4200 lbs. load capacity) |
| Max Straight Part Length |
24 inches |
| Motion Generator |
5 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. (reversing) |
| Lining |
Abrasion-resistant lining of cast polyurethane with ¾” minimum thickness in high wear areas. |
| Shipping Weight |
Approximately 2250 lbs. (including control panel) |
FMD-24LR
| Capacity |
24 ft³ (7200 lbs. load capacity) |
| Max Straight Part Length |
36 inches |
| Motion Generator |
10 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. (reversing) |
| Lining |
Abrasion-resistant lining of cast polyurethane with ¾” minimum thickness in high wear areas. |
| Shipping Weight |
Approximately 3800 lbs. (including control panel) |
