Miscellaneous Products – MSDS Information
April 11, 2016Sweco Long Radius MIlls
May 5, 2016
FM-1.2C
| Capacity | 1.2 ft³ (300 lbs. load capacity) |
| Max Straight Part Length | 9 inches |
| Motion Generator | 1/3 hp, TENV, 1200 RPM, single phase 115 volt; 3-phase 230, 460 or 575 volt. 60 Hz. |
| Vibralite Bowl | Chamber – all cast polyurethane elastomer with ¾” minimum thickness in high wear areas |
| Shipping Weight | 210 lbs. (empty) |
FM-3C & FM-3HA
| Capacity | 3 ft³ (900 lbs. load capacity) |
| Max Straight Part Length | 12 inches |
| Motion Generator | 1 ¼ hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. |
| Lining | 5/16″ Cast Polyurethane Elastomer |
| Shipping Weight | Approximately 550 lbs. |
FM-10V & FM-10C
| Capacity | 10 ft³ (3000 lbs. load capacity) |
| Maximum Straight Part Length | 24 inches |
| Motion Generator | 5 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. |
| Lining | ¾” Cast Polyurethane Elastomer |
| Shipping Weight | Approximately 1175 lbs. |
Model FM-10C available with curved outer chamber wall.
FM-20HA
| Capacity | 20 ft³ (6000 lbs. load capacity) |
| Maximum Straight Part Length | 30 inches |
| Motion Generator | 10 hp, TENV, 1200 RPM, 3-phase 230, 460, or 575 volt. 60 Hz. |
| Lining | ¾” Cast Polyurethane Elastomer |
| Shipping Weight | Approximately 2500 lbs. (including control panel) |
