patchwork_200

LOW DENSITY Compositions:

 

“D10” – Fast cut w/ matte finish
General purpose media for removal of burrs, flash, die marks, and sharp edges.

 

“HR90” – Fast cut w/ bright low micro-inch finish
Surface preparation of parts requiring plating or buffing.  Can eliminate a two-step process.

 

“HR100” – Medium cut w/ low micro-inch pre-plate finish
Surface preparation of parts requiring plating, buffing, or burnishing.  Can eliminate a two-step process.

 

“HR200” – Mild cut w/ extremely low micro-inch pre-plate finish and reduced underhaze
Surface preparation of parts requiring plating, buffing, or burnishing.  Provides a smooth, reflective, clean finish.

 

HIGH DENISTY Compositions:

 

“D150” – Most aggressive cut w/ matte finish
Removes surface imperfections, forms radii, blends sharp edges and parting lines.

 

“D154” – Fast cut w/ low micro-inch matte finish
For deburring and surface removal on ferrous and non-ferrous parts.  For short cycles and pre-plate finishes.

 

“D155” – Medium cut w/ bright low micro-inch finish
Surface preparation of ferrous and non-ferrous metals.  Produces a bright pre-plate finish.

 

“D165” – Mild cut w/ bright low micro-inch pre-plate finish
Surface preparation of ferrous and non-ferrous metals.  Produces a very bright pre-plate finish.

 

HIGH PERFORMANCE  Compositions:

 

“D55” – Most aggressive cut w/ no aluminum oxide impregnation
Silicon carbide abrasive for deburring of ferrous parts.  Well suited for parts to be welded or braised.

 

“D30” – Very aggressive cut w/ matte finish
Removes machine lines and forms radii on hard metals.  Increased production through reduced cycle times.

 

“D20” – Fast cut w/ clean finish
White aluminum oxide abrasive for clean, bright finish on all metals.

 

“D50” – Mild cut w/ low micro-inch finish
Silicon carbide abrasive for low micro-inch finish on parts to be welded or braised.

 

“D3M” – Mild cut w/ very low micro-inch finish
Aluminum oxide abrasive for very low micro-inch finish where plating is not required.

 

“D70” – Extremely mild cut w/ very low micro-inch finish
Produces matte finish with no stock removal.  Can be used as carrier of chemical accelerants or loose abrasive.

 

 

 

Plastic Tumble Media

 

Shape Size Dimensions (IN)
Triangle B W H
000 2 1-1/4 1-1/4
00 1-3/4 1 1
1 1-1/4 5/8 5/8
2 1-1/8 1/2 1/2
3 7/8 1/2 7/16
4 3/4 1/2 3/8
5 5/8 1/2 5/16
Cone D H
000 2 2
00 1-3/4 1-3/4
1 1-1/4 1-1/4
1-1/2 1 1
2 7/8 7/8
2-1/2 3/4 3/4
3 9/16 9/16
8 3/8 3/8
Pyramid B S H
00 1-7/8 1 1-1/2
0 1-5/8 7/8 1
Star P-P T
00 1-3/4 3/4
1 1-3/8 1/2
Tetrahedron S
0 1-3/8
1 1
Wedge B H
1 2-1/2 1-1/4
3 1-1/2 3/4